ASPE Parts

Description The squeegee cylinder raises and lowers the squeegee on the print head. Each print head has two of them. This part does not include th...

Description The size of the squeegee should match the size of your pallets and flood bar. LP1-LP4 Squeegee Holders (all triple durometer 65/90/...

Description The squeegee cylinder thumbscrew allows you to adjust the pressure the squeegee exerts on the screen; each print head has two.   Add...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different si...

The stroke cylinder moves the squeegee back and forth. The Stroke Cylinder New is universal between all of our new model standard Rapidtag machines...

Description Stepper Motor Driver   Additional information Weight 3 lbs

Description The stepper motor rotates the print pallets, moving the garments underneath the print heads and flash cures. It includes a welded...

Additional information Weight 1.343 lbs PLC PLC 24 Port LP2 LP3 & XL, PLC 36 Port LP4 & XL, PLC MINI LP1

Description The terminal connects wires in the electrical system. There is a 4 port and a 5 port version, so please make sure you are orderin...

Description The circuit breaker protects the machine’s electrical components from power surges. There are also 10A and 20A circuit breakers in ...

Description The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. The LP-1 uses a di...

Description The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. This part is in us...

Description The E-stop provides a quick and easy way to shut off the machine in case there are any problems.   Additional information Weight...

Description The backlash assembly regulates the distance between the two drive gears. the backlash set screw is an integral part of the assembl...

Description The bronze bushings are used in several places on the machine where a shaft moves.   Additional information Weight 0.0058 lbs ...

Description The back lash assembly regulates the distance between the two drive gears. It is located next to the indexing motor and motor cover...

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Bal...

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Rod...

Description The Motor cover closes the base.   Additional information Weight .816 lbs

Description The air manifold connects the air source to the solenoid valves.   Additional information Weight 1 lbs

Description 4.3″ Human Machine Interface touchscreenThe touch screen allows you to control and interact with the machine.   Additional informati...

Description All Pallets are 16 inches long, please choose the width you need.   Additional information XL Pallet LPXL 13.25" W x 16" L, Slee...

Description The registration system latches onto the registration bearing block to hold the print pallets in the correct position. They are not...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sur...

Description This air fitting splits the air tubing on the machines. It connects three tubes and has no threading.   Additional information W...

Description This air fitting is present on the manifolds in the machines. It has 1/8 NPT threading.   Additional information Weight 0.0246 lbs...

Description The T-head adjust knob holds the flash cure cover to the flash cure bracket. there are different sizes of this part, so please make s...

Description The main switch controls power to the entirety of the machine.   Additional information Weight 0.2048 lbs

Description The toggle switch actuates the index assembly. It is present on the LP-2, LP-3, LP-4, and LP-2XL.   Additional information Weight ...

Description The plug fitting is present in the manifolds of some machines.   Additional information Weight 0.0133 lbs

Description The flash cure reflector focuses the light and heat from the lamps onto the product to help facilitate curing.   Additional informati...

Description Each flash cure has a square of insulation inside to retain the heat generated by the lamps.   Additional information Weight 0.2 l...

Description All Pallets are 8 inches long, please choose the width you need. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 u...

Description The size of the flood bar should match the size of the pallets and squeegees of your machine. Inches to CM Converter Flood Bar ...

Description The squeegee flipper shaft connects the squeegee flipper block to the carriage.   Additional information Weight .1728 lbs ...

Description The power cable comes assembled with a power inlet and is pre-stripped on the other end. They are sold per piece.   Additional inform...

Description Stroke Cylinder for the LPXL Series.

Description The Air Pressure Switch attaches to the manifold. It detects whether air pressure is present and will warn you if that isn’t the case...

Description The communication cable connects the touchscreen of the machine to the PLC. This allows the machine and its user to communicate.   Ad...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description This air fitting is present on the air cylinders of some machines. There are several different sizes of this type of fitting, so plea...

Description This air fitting splits the tubing in the machines. There are different sizes of this type of fitting, so please make sure you are or...

Description The leveling feet allow you to adjust the height of the machine and to ensure that it is perfectly level.   Additional information ...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The size of the squeegee should match the size of your pallets and flood bar. XL Squeegee Holders (all triple durometer 65/90/65) ...

Additional information Weight 1.446 lbs Dimensions 1 × 1 × 1 in

Description 1500W Socket (Large Automatics) The flash cure lamp socket holds the halogen bulbs in the flash cure units.   Additional information ...