ASPE Parts

Description 5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most o...

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Aluminum/Aluminium Screen Printing Frames with Mesh for the LP1 Printer only. 9″x20″ | 22.86×50.8cm We stock printing screens with several differe...

The print pallets hold the garment. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 uses 10 pallets. The size of your print pall...

The flood bar redistributes the ink after the print stroke. The size of the flood bar should match the size of the pallets and squeegees of your ma...

The flood bar redistributes the ink after the print stroke. The size of the flood bar should match the size of the pallets and squeegees of your ma...

The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

The squeegee flipper shaft connects the squeegee flipper block to the carriage.

The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. This part is in use on the LP-2, L...

The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

The flash cure lamp socket holds the halogen bulbs in the flash cure units.

Solid state relay with 90-250 VAC Input and 24-440VAC 50/60HZ 80A Output. Replacement part for many large flash cures and electric dryers on the ma...